Wednesday, November 15, 2006

Nissan 5HP 4-Stroke Auxillary




Today my new Nissan 4-stroke outboard arrived and to my relief I found that it fit perfectly into the motor mount built into the Tiki 21 bridgedeck by the original builder. This mount is lower than deck level, so the 20" shaft gets the prop well below the waterline and as you can see in the photographs, it does not protrude high above the deck level.

The Nissan/Tohatsu line of outboards come in a 4, 5 and 6 horsepower size, all three of which are the same weight: 55lb.s. I chose the 5 because this size comes with an external fuel tank and line. As I found out long ago on my Hitia 17 with it's 3.3 hp Evinrude, there is nothing more inconvenient than trying to fill a small internal fuel tank when it runs dry in choppy conditions and you end up spilling gasoline all over the engine and the decks. I also wanted forward, neutral and reverse gears, which this engine has, and the quiet, reliability, and fuel economy of a four-stroke.

I found the best price for this engine at www.onlineoutboards.com. I ordered it on Monday and it arrived today, shipped for free via FedEx.

4 comments:

tsunamichaser said...

Looks good. The Tiki 21 is pretty flat decked.

Scott B. Williams said...

Yeah, the deck are all the same level. Unlike the Tiki 26 there is no footwell, so seating is either on the cabin tops with hatches closed or on the decks leaning back against the cabin sides. I've also built some helmsman's seats that can be placed on the open hatch coamings or down in the cabins to sit kayak style halfway in. I'll post photos of that soon.

BROKBLOG said...

Hi Scott
You wouldn't happen to have a few photographs of the mount for the motor?
The deck looks interesting too. How did you attach it to the boat?

Regards
Thomas

Scott B. Williams said...

Thomas,

It's the standard Tiki 21 deck and motor mount. You can probably find more photos of it online from other boats. The deck simply hangs from the mast crossbeam and rear crossbeam, resting on the top of the bottom flange.